Go Back Email Link
–+ servings
felt heart garland in shades of pink.
Print

Felt Heart Garland DIY

This new sew tutorial will teach you how to make the cutest felt heart garland for any party or to use as a piece of decor.
Yield: 1 garland

Equipment

  • 1 Pair of scissors
  • 1 hot glue gun

Materials

  • 1 roll of twine, in your desired length
  • sheets of felt in various shades of pink and red, or your preferred colors
  • sticks hot glue
  • pom poms

Instructions

  • The first thing I did was draw a heart template on card stock and cut that out as a guide! If possible, use the guide without tracing it on the felt.
  • Cut out the felt using the template. I made a total of 13 hearts, so 26 cut outs.
  • Cut 13 strips of twine, yarn, or string. Mine were approximately 8 inches long. Fold the twine or string of choice in half.
  • Take 1 heart and place the folded piece of twine, fold side down, on the top center of the felt heart. Use the hot glue gun to glue the twine and along one side of the outer edge of the heart. Place a second felt heart on top so that the edges match up, and press together. This should form a pocket once the glue dries.
  • Place a pom pom inside of the pocket, then add glue along the outer edge of the open half and press the felt together. Repeat for the remaining 12 hearts.
  • Place a pom pom inside of the pocket, then add glue along the outer edge of the open half and press the felt together. Repeat for the remaining 12 hearts.
  • Measure and cut out the desired length of twine needed for the felt heart garland. I used about 4 feet of twine.
  • Tie the felt hearts to the string in the desired pattern. I knotted each heart tightly to the garland and then cut the excess twine from the heart.